Hot Air Pen Set

The Hot Air Pen has been designed to provide a highly controllable source of heat over a small treatment area without contact on the object, which minimises the risk of dislodgement of poorly adhered particles.

The Hot Air Pen has been designed to provide a highly controllable source of heat over a small treatment area which can be closely observed and managed. The Hot Air Pen quickly and safely heats the surface with point accuracy and without contact on the object, and at low air flow settings. This minimises the risk of dislodgement of poorly adhered particles.

The Willard Hot Air Pen is supplied as a set complete with it's own bespoke Controller, The lightweight balanced hand-piece with wooden handle, 3No. interchangeable nozzles and a purpose made stand for the hand piece.

The 3No. interchangeable nozzles (2mm, 3mm, and 16mm x 1mm fan shape),

The hand piece (pen) connects to the bespoke control unit via a kink-resistant two metre (78 inch) insulated silicon flex, which provides independent control of temperature and air flow through the pen . A Conversion Chart supplied (see image below) indicates the air temperature at the nozzle exit where it is measured by a sensor, the reduced temperature at the work surface is then calculated based on a specific distance.

The front panel houses the air flow regulator and temperature control together with an on/off switch and red indicator. The air flow is variable within the maximum and minimum settings and the temperature is variable from ambient to 180ºC (356ºF) the red indicator light signals when the heating element is on.

On the rear panel of the controller is a socket for the optional Willard Temperature Monitor together with access to the input and output fuses.

Controller Size: 200 x 200 x 80mm (8 x 8 x 3in)

Controller Weight: approx 4kg (9 lb)

The Hand-Piece Data

Length: 165mm (61/2in)

Handle diameter: 40mm (1-1/2in) max and tapered towards the nozzle

Weight: (excluding nozzle) 100g (3-1/2oz)

NB.This Controller is specific to the Hot Air Pen, as it regulates the temperature & Air Flow within the pen, it is therefore not interchangeable with the Standard or Special control units for use with Heated Spatulas & Irons

 

 

Availability: In stock