Laboratory Sink

These versatile washing sinks are a useful addition to any studio or laboratory. They are designed to provide conservators with a flexible system suitable for most locations. The washing tank is supplied with a geared tilting mechanism, which can be used during either the washing, draining or drying processes.

The individually constructed Stainless steel tank has a smooth double folded top lip for rigidity.together with an extra thick rigid base of stainless steel to ensure strength & flatness. The drainage point is generally located on either the centre line or to one side, at the hinged end of the tank. At the opposite end is a geared crank handle which enables the sink assembly to be gradually tilted up to approximately 4 inches (100mm) in height.

The tilting cradle holding the sink assembly is mounted on a robust powder coated box section frame which can be supplied with either lockable castors or fixed feet (if the sink is to be in a fixed location), in both instances there is approximately 50mm (2 inches) of adjustment at the base of each leg to allow for leveling the base frame

Optional equipment,

Heating System,

Consisting of an undersurface sensor controlled heating System primarily designed to maintain the temperature of pre-heated water, this is supplied with a  wall or cabinet mounted control console with thermostatic adjustable temperature setting.

Splash-backs

These stainless steel splash backs can be manufactured to compliment a sink installation within a fixed position and can be used to accommodate taps where required.

Service Pedestal,

This can be supplied to fit adjacent to the sink and can be used to contain localised water treatment and filtration equipment, supplied with a stainless steel splash-back fitted to the top to facilitate the location of taps etc, 

Lightweight Cover,

A useful lightweight cover is available, which can either be a single or dual piece, this enables the sink double as a useful work space area when not in use.

The standard model sink measures approximately 1.8m x 1.2m (6ft x 4ft)

Standard height of 760 to 810mm (30 to 32in), also available in alternative heights, as required

We offer a fully bespoke service and can manufacture laboratory sinks to meet a variety of demands in several different sizes, please contact us to discuss your requirements.

Availability: In stock