Spotting Tables

Spotting Tables are designed for small area suction treatments on a variety of materials, including paper and textiles. They are typically used for forced flow cleaning and bonding operations where it is important to hold repairs firmly in place. The working area can be masked down for even more precise spotting treatments.

Fully integrated model

The perforated work surface is set into an aluminium monobloc chamber capable of withstanding high pressures without distortion. This is flush mounted into a durable and attractive Trespa® worktop.

An enclosed support frame houses the suction source. A speed control dial and digital illuminated suction readout  gauge are situated on the front panel. The equipment is designed to be used by a sitting or standing operator. There is an inset below the worktop on one side to provide leg room and the perforated area is offset towards that side. Air and cleaning solutions pass into a moisture trap which protects the suction source. The flow then passes through either an exhauster (high volume, low to medium pressure) or a vacuum pump (low volume, high pressure) and exits at the back of the unit. A carbon filter (see separate section) may be connected to the exhaust outlet via a short length of flexible hose.

Dimensions: Working area 300mm x 400mm.

Worktop overall 1000mm x 600mm. Height 920mm.

This product can also be custom made to suit specific size requirements

Open model

The perforated work surface fits neatly onto a purpose made rigid box section powder coated steel frame, which can be mounted on lockable castors. The frame is fitted with a low level support frame, which houses the open suction source.

Prices start from £3750.00 for the open model & £7250.00 for the fully integrated

 

Availability: In stock